Train Your Chopping Game

Newgy Robo-Pong

 

The best description for the modern chopping style of play is "an attacker who uses an aggressive backspin game to set up his/her own attack." Normally this style of player uses two different surfaces on their rackets, usually one is an inverted rubber and one will be pips-out, either long pips or short.

The returns from such different rubbers can cause the straight topspin attacker a lot of confusion. However, it also demands a great deal of training by the chopper to learn to control the many options he/she has for each stroke. This is especially true at the higher l evels where choppers can flip their rackets at will to produce a large variety of returns and attacking strokes.

I consider the Robo-Pong an indispensable tool in training choppers. The very nature of their games makes it hard to find practice partners who can consistently drill against a good chopper.

While every chopper will use a different blend of offense and defense, here are some good basic drills that I have successfully used in training such choppers as Derek May, Pan Am Games Silver Medallist.

Warming Up Drills 

For all styles of players, I recommend that you warm-up the short strokes first, before trying to hit or chop with longer and harder strokes. These are strokes that consist of using only the wrist and elbow joints. This will help you quickly get into the proper timing and allow you to establish ball control early during your warm-up. For the chopper this means starting off with pushing and blocking drills like the ones listed below:

(Editor's Note: You may wish to browse our Coaching Forum Archives for articles on how to execute a push or block.) Push against

Backspin / Inverted Side Whole Table

Set your Newgy for backspin with the oscillator on 3-4. This will sweep the whole table. Practice using only the inverted side to push, regardless if you use a backhand or forehand. This is great practice for footwork, and for flipping the racket. At the higher levels of the game, most choppers will push primarily with the inverted side.

Push against Backspin / Pips-out Side

Set your Newgy as above, but this time only push with the pips-out side. Be sure to work on keeping the ball low.

Backhand Block / Counter Against Topspin

Set your Newgy on a medium topspin with the oscillator set at 3-4. First, warm-up your counters and blocks with the inverted side. After a few minutes flip and warm-up your pips-out counters and blocks. If you use a chop block now is the perfect time to warm up this stroke as it leads naturally into the chopping strokes.

Choppers often find it difficult to find a practice partner who is steady enough to consistently attack their chops. Over the years, I have coached a number of choppers, among them; Derek May a Pan American Silver Medal winner. In setting up their training plans, working with the Newgy Robo Pong 2000 has always been an essential element of their training. The Robot provides the consistent attack that is necessary for the chopper to work on his/her placement and movement. The Robot is so versatile that an almost limitless variety of drills are possible. Here are a few of the basic drills that I have my chopping students do at each workout.

Drill 1 - Forehand In and Out 

Set your Robot for topspin at a ball speed and feed that is about 75% of what you can comfortably return. Direct the Robot's shots to your forehand with no oscillation. Practice chopping from mid-distance and gradually work your way in towards the table. Repeat moving in and out to practice your ability to take your opponent's ball at different distances from the table. Repeat this drill using your backhand.

Stroke Tip: The closer you are to the table the higher your back swing must start and the shorter and more downward your follow-through. Close to the table your contact point on the ball is towards the middle. When back from the table your contact point is towards the bottom of the ball and your follow-through will be longer and more forward.

Drill 2 - Chopping to a Location 

Set your Robot for topspin at a ball speed and feed that is about 80% of what you can return. Set the Robot on full table oscillation. Practice making all your returns towards one of three positions (deep to forehand or backhand corner, or deep to the middle). Repeat this drill until you have practiced making all returns to each location.

Drill 3 - Covering the Middle 

Set your Robot for topspin at a ball speed and feed that is about 80% of what you can return. Set the Robot to oscillate over one half of the table (positions 2 & 5). Practice taking all your returns with either your forehand or backhand. Focus on getting your body out of the way for the return to your middle. Repeat using both forehand and backhand.

Drill 4 - Serve Return Using One Side of the Racket 

This drill is designed for choppers using two different types of rubber on their rackets. Set your Robot to produce short sidespin-backspin serves. Set the Robot to oscillate over the whole table. Practice receiving all serves with your inverted side of the racket. Repeat using the other side of the racket.

Drill 5 - Chop and Loop Drill 

Set your Robot for topspin at a ball speed and feed that is about 80% of what you can return. Set the Robot to oscillate over the forehand half of your table. Practice mixing your chop returns with forehand loops. Repeat setting the Robot to oscillate over the backhand side of your table. Practice mixing backhand chops with step-round forehand loops.

Drill 6 - Chop Reaction Drill 

Set your Robot for topspin at the maximum ball speed that you can handle with full table oscillation. Start on a slow ball feed and have a helper gradually turn up the feed to the highest speed. Practice on getting your racket on as many balls as possible. Object of this drill is to decrease your reaction time. With practice your will find that you can handle even the highest feed rate.

These are just a few of the chopping drills that are possible on your Newgy Robo-Pong 2000. By using your imagination your will be able to come up with many more. Good luck and Good Chopping!

Add a comment

* Comments must be approved before being displayed.